Miller HDC 1500DX CE, Руководство пользователя

Страница: 31 / 48

OM-212 296 Page 25
6-4. Front Panel Controls
Ref. 236 564-B
See
Section 6-3
See
Section 6-9
See
Section 6-5
See
Section 6-6
See
Section 6-10
See
Section 6-7
See Section 6-8
6-5. Upper Display
1 Upper Display
The upper display shows voltage or time. The
unit displays both preset and actual arc volt-
age. When the unit is in a welding state, actu-
al arc voltage is displayed. The upper display
shows welding sequence time when the Time
LED is illuminated.
2 Upper Display Push Button
Press and hold button to adjust or display
weld time. Release button to display voltage.
3 Upper Display Push Button LED
The upper display push button LED illumi-
nates to indicate that information displayed
can be changed with the Adjust control.
4
Volts LED
5 Time LED
The LED’s below the display illuminate to in-
dicate which value is being shown.
At any time while welding, the unit permits the
adjustment of the weld sequence voltage.
• If the unit is displaying a welding sequence
that can be timed, the welding time display
mode is entered by pressing the upper dis-
play push button repeatedly until welding
time is the active parameter in the upper
display. At idle, the upper display toggles
between showing weld voltage or weld time
with subsequence presses of the upper
display push button.
• The unit defaults to displaying welding volt-
age when a welding sequence display
mode is first entered.
V t
5
1
4
3
2
(sec)