2
I. REQUIREMENTS
A. WARNINGS AND LIMITATIONS
Proper precautions should always be taken to remove any obstructions, debris and other material
from the work area that could cause injuries or interfere with the operation of the unit. Caution
should also be taken to insure that all equipment will be clear of all other recognized hazards and
that proper precautions have been taken to address all safety issues in the work area.
Note: Users should be familiar with pertinent regulations governing this equipment. All individuals who use this
product must be correctly instructed on how to use the system, and must read and understand the following
instructions before using the unit.
• For use by one person only. The design working load is 310 pounds (140.6 kg) — DO NOT
EXCEED THIS WEIGHT.
• Only trained personnel should use this device.
• Do not use the unit if the lifeline doesn’t retract.
• Do not use the unit if the lifeline brakes do not engage. Refer to inspection procedures for more
details.
• Do not use the unit if any part of the system appears to be damaged.
• Never use the Carry Handle (MP50 & 65) as an attachment point.
• Do not use the unit if it has been subject to fall arresting forces. Return the unit to Miller Fall
Protection or an authorized service center.
• Do not use the unit if the load impact indicator has been activated.
Carabiner
Fasteners
Housing
Cable
Ferrules
Self-Locking Snaphook
Front Label
Back Label w/Identification Insert (back)
Stainless Steel Swivel
Falcon Series Models MP50 & MP65
Carry Handle
(Never use for attachment.)
