.
A complete Parts List is available at www.MillerWelds.com
OM-624 Page 5
SECTION 3
−
DEFINITIONS
3-1. Additional Safety Symbols And Definitions
.
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012
−
05
Disconnect input plug or power before working on machine.
Safe30 2012
−
05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2012
−
05
Do not remove or paint over (cover) the label.
Safe20 2012
−
05
XXXXX
Use coolant suggested by the manufacturer.
Safe52 2012
−
05
Recycle.
Safe103 2012
−
09
Read the Owner’s Manual before working on this machine.
Safe70 2012
−
06
Read the labels on the welding power source, wire feeder, or other
major equipment for welding safety information.
Safe71 2012
−
06
Safe50 2012
−
05
Plugged filter or hoses can cause overheating to the power source
and torch.
100 h. Std.
Safe51 2012
−
05
Every 100 hours, check and clean filter and check condition of hoses.
