Miller 819A, Техническое руководство

Страница: 32 / 44

TM-268 819 Page 30 Belt Driven Generator
Table 10-1. Lead List Summary For 4 kW Generator Eff w/MD200653R And Following
.
Table shows physical lead connections and should be used with circuit diagram (table replaces wiring diagram).
.
Plug PLG31 was previously labeled PLG14.
Apply small amount of dielectric grade, nonconductive electric grease (Miller Part No. 146 557) to connectors where factory-applied
grease had been present.
.
The following is based on the Deutz Tier 4 version of the 4 kW generator.
50 Hz Generator
Lead Connections Lead Connections
GND ENGINE TO 3T
1A STATOR TO CB1
4A STATOR TO CB1
5A STATOR TO RC4 (3)
6A STATOR TO RC4 (4) 81B CB1 TO 1T
84B CB1 TO 2T
90A STATOR TO 3T
JUMPA ROTOR LEAD TO DIODE
60 Hz Generator
Lead Connections Lead Connections
GND ENGINE TO 3T
1A STATOR TO CB1
4A STATOR TO CB1
5A STATOR TO RC4 (3)
6A STATOR TO RC4 (4) 81B CB1 TO 1T
84B CB1 TO 2T
90A STATOR TO 3T
JUMPA ROTOR LEAD TO DIODE
Control
Lead Connections Lead Connections
5C CR1 (4) TO RC2 (C)
6C RC2 (D) TO C1
7A CR1 (7) TO C1 8A CR1 (A) TO RC5 (C)
9A CR1 (B) TO RC5 (B)