OM-1500-9 Page 12
SECTION 4
−
SPECIFICATIONS
4-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Unit Specifications
Type of Input Power
Welding Power
Source Type
Spool Specifications
Welding Circuit Rating
Overall Dimensions
Weight
24 Volts AC
Single-Phase
10 Amperes
50/60 Hertz
Constant Voltage (CV)
DC With 14-Pin And
Contactor Control
Max Spool
Capacity:
18 in. (457 mm)
Max Spool Weight:
60 lb (27 kg)
100 Volts,
600 Amperes, 100%
Duty Cycle
Length: 27 in. (686 mm)
Width: 12-1/2 in.
(318 mm)
Height: 14 in.
(356 mm)
45 lb
(20.41 kg)
4-3. Wire Type, Size, And Feed Speed Capability Table
Motor Speed
Wire Type
Wire Size
Rated Speed Range
Rated Speed Range
(per IEC 60974-5)
Standard Speed
All
.023 To 5/64 in. (0.6 To 2 mm)
50 To 780 ipm (1.3 To 19.8 mpm)
55 To 770 ipm (1.4 To 19.6 mpm)
Low Speed
All
5/64 in. To 1/8 in. (2.0 To 3.2 mm)
19 To 300 ipm (0.4 To 7.6 mpm)
55 To 300 ipm (1.4 To 7.6 mpm)
High Speed
All
.023 To 5/64 in. (0.6 To 2 mm)
90 To 1440 ipm (2.3 To 36.6 mpm)
92 To 1435 ipm (2.3 To 36.5 mpm)
4-4. Environmental Specifications
A. IP Rating
IP Rating
IP2X
This equipment is designed for indoor use and is not intended to be used or stored outside.
IP2X 2014
−
06
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low
−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
ce-emc 3 2014-07
