Miller 195406, Руководство пользователя

Страница: 16 / 32

OM-227 169 Page 12
4-4. Installing Power Source To Cooler
801 190-B
!
Turn off and disconnect input
power from power source.
1 Power Source
2 Lift -Eye
3 Cooler Connection Cable
4 Cooler
5 Screw 0.250-20 (8)
Remove screws from right side panel,
unplug case fan connector, and remove
right side panel from power source.
Remove snap-in blank from power source
base.
Locate and loosen cooler connection cable
from inside power source, and place
connectors through hole in base. Insert
snap-in grommet into hole.
Use lift-eye to suspend power source
above cooler and plug connection cable
into matching connectors in cooler top
cover.
!
Keep hands and fingers away from
pinch points when lowering power
source onto cooler.
Slowly lower power source onto top cover
of cooler making sure connection cable is
not pinched between power source base
and cooler.
Install supplied screws 8 places to secure
power source to cooler.
Reconnect case fan and install power
source right side panel.
Tools Needed:
3/8 in.
1
2
3
4
5