AW12-RF/MRF-01 INSTALLATION INSTRUCTIONS
Preliminary
1-
PARTS LIST
PART NUMBERS
-AW12-RF Single Channel
Transmitter/Air Wave™ Switch
Assembly
-MRF-01 Single Channel Receiver
-P/N=? Battery, CR2032
-(4) #6-20x3/4”, Screw, Self-Drilling
2-
INSTALL TRANSMITTER/AIR
WAVE™SWITCH ASSY
-Open box, unpack battery and remove
lid from the AW12-RF.
-Install CR2032 battery as shown with
the “+” side up. Notice that the Red LED
blinks once upon insertion.
-Now position & attach, with provided
screws, your AW12-RF to your bottom
angle or end stile of your door. Replace
lid.
-Now, dependent upon your “kit”, make
the necessary airline connections.
