find out more about this in Chapter 10 of
these instructions.
Important tips for care of your device:
•
Please ensure you charge your eONE at
least every 2 months.
•
We recommend recalibrating the eONE
every 2 months. To do so, please remove
all pieces from the board and press and
hold the ON/OFF button down for 10
seconds. You can find more instructions
about calibration in Chapter 10.
4 CHARGING THE DEVICE
•
Connect a USB Type 3 cable to the eONE.
•
Connect the USB cable to a computer or
USB power adapter.
•
We recommend using a standard USB
power adapter with 5V ≥ 600 mA.
•
The device takes a maximum of 4 hours
to fully charge.
•
Please charge the eONE completely
before the first game.
•
To ensure long battery life, please charge
the eONE at least every 2 months.
4.1. Charging indicators
•
When the eONE is switched on: The LED
on the middle button flashes.
•
When the eONE is switched off: All 3
LEDs on the buttons light up dimmed,
increasing in brightness. When all 3
LEDs are continuously lit, the battery is
fully charged.
4.2. Charge level indicators
•
Every time the device is switched on,
the 3 LEDs on the buttons flash briefly.
The more the LEDs flash, the higher the
battery’s charge level.
•
If only the left LED flashes, we
recommend you charge your eONE
soon.
•
If the battery is completely drained, only
the middle LED flashes.
•
Game time depending on how bright
the LEDs are and the connection type at
least 18 hours.
•
Standby time approx. 2 months.
5 CONTROLS AND THEIR
FUNCTIONS
The eONE features the following controls:
•
64 chess squares (each with 4 LEDs
and a sensor) to display the opponent‘s
moves.
•
USB Type C connection for charging and
data exchange.
•
On/Off
button
◇
Switch on/switch off – press briefly
◇
Short reset – press and hold the but-
ton for 3 seconds – the LEDs for the
starting position are now continu-
ously lit – clears the currently saved
positions and restores the factory
settings.
◇
Start calibration – press and hold the
button for 10 seconds.
•
Invert board
button
◇
Main function: Invert the
board – the black pieces
are now at the front
◇
Additional function: Under-
promotion to a knight
•
LED brightness
button
◇
Main function: Dimming
the LEDs
◇
Additional function: Under-
promotion to a bishop
•
Bluetooth
button
◇
Main function: Bluetooth
connection ON/OFF
◇
Additional function: Under-
promotion to a rook
◇
Note: If transmitting data
via USB cable, Bluetooth
must always be switched
off!
•
RESET
switch
◇
The RESET switch is located underne-
ath an opening on the bottom of the
eONE chess board.
◇
It can be operated with a sharp
object (e.g. a bent open paper clip).
Use it to restart the eONE if the board
is disabled and no longer reacts to
inputs.
Note on using the front buttons:
Always press the 3 front
buttons using your flat
finger. This must be
applied flat from the
edge of the board so
that the buttons respond
correctly.
Содержание M841 eONE
Страница 1: ...M841 eONE Instruction...
Страница 2: ......
Страница 10: ......
Страница 11: ...www computerchess com Copyright 2021 MILLENNIUM 2000 GmbH Aschheim...