Millennia NSEQ-2, Руководство пользователя

Страница: 5 / 9

Page 5 of 9 rev 100321 Millennia Media NSEQ
NSEQ Controls
NSEQ-2 Front Panel
1. Band In/Out Switch "IN" — places its associated
EQ band in circuit or out of circuit
2. Frequency Select Switch — selects fixed high and
low band frequencies
3. Peak/Shelf Select — When LED is on, EQ is
shelving at 6 dB per octave. When LED is off, EQ is
peaking with a fixed "Q" of 1.0.
4. Boost/Cut Control — +18 dB of boost and -18 dB
of cut. Boost/Cut potentiometer has 21 detented
positions for accurate repeatability and session log-
ging.
5. Parametric Frequency Control – selects EQ center
frequency.
6. Parametric Frequency Range Select Switch
"10X"
— When LED is on, frequencies as shown on
front panel legend are multiplied by 10X. When LED
is off, frequencies are as shown on front panel
legend.
7. Parametric Q Control – EQ bandwidth.
8. Master Equalizer In/Out Select Switch — "EQ
IN " places EQ in the signal path. Hardwired relay
bypass when out.
9. Twin Topology — Select J-FET (LED illuminated) or
Vacuum Tube circuitry.
10. Gain Range — +/- 18dB or +/- 9dB
11. Power Indicator — when illuminated shows the
NSEQ-2 is powered up and active.
12. Power Switch — turns power on and off.
NSEQ-4 Front Panel
1. Band In/Out Switch "IN" — places its associated
EQ band in circuit or out of circuit
2. Frequency Select Switch — selects fixed high and
low band frequencies
3. Peak/Shelf Select — When LED is on, EQ is
shelving at 6 dB per octave. When LED is off, EQ is
peaking with a fixed "Q" of 1.0.
4. Boost/Cut Control — +18 dB of boost and -18 dB
of cut. Boost/Cut potentiometer has 21 detented
positions for accurate repeatability and session log-
ging.
5. Parametric Frequency Control – selects EQ center
frequency.
6. Parametric Frequency Range Select Switch
"10X"
— When LED is on, frequencies as shown on
front panel legend are multiplied by 10X. When LED
is off, frequencies are as shown on front panel
legend.
7. Parametric Q Control – EQ bandwidth.
8. Master Equalizer In/Out Select Switch — "EQ
IN " places EQ in the signal path. Hardwired relay
bypass when out.
9. Balanced/Unbalanced Input — Unbalanced
increases gain by 6dB to compensate for possible
signal loss when balanced and unbalanced
equipment is used in the same signal path.
10. Gain Range — +/- 18dB or +/- 9dB
11. Power Indicator — when illuminated shows the
NSEQ-4 is powered up and active.
12. Power Switch — turns power on and off.
6
1
8
1
2