Millenium KS-3000 B, Руководство пользователя

Страница: 11 / 16

1. Place the body (1) on the floor that the rail with the locking screws points downward.
Pull the feet (3) of the keyboard stand completely out of the body (1). Then fold the feet
outwards until they snap into place. Now set the keyboard stand with its feet on the
floor.
2.
Loosen the locking screw of the securing pin (5) and slide the securing pin (4) to the
ground. Then tighten the locking screw of the securing pin back firmly.
3.
Flip out the arms of the lower and the upper keyboard rest (7). Loosen the associated
locking screws (6) and slide the keyboard rests (7) to the desired height. If the handle (8)
should be obstructing at that, loosen its locking screws, move it to a different position
and tighten the locking screws of the handle back firmly.
If the keyboard rests are at the correct height, tighten the locking screws (6) back firmly.
4. Now you can put your instruments on the keyboard rests. To facilitate the wiring, two
movable cable holders are attached to the body.
On the thread (2) at the head of the body, you can attach a suitable microphone arm.
Setting up
Operating
KS-3000 B/KS-3000 S
11