Millcreek TURF TIGER 3100, Руководство оператора

Страница: 49 / 54

C-5
Engine Mount and Drive System Assembly (continued)
Item # Part # Qty Component Description
1 220138 1 Spring
2 261782 1 Jack Shaft Brace
3 261699 1 Left Support Bracket
4 210442 1 3-1/2" Double Pulley (includes 2 setscrews 34325)
5 261289 1 Jack Shaft
6 210131 3 1/4 x 1-1/4 Key
7 261594 1 Belt Idler Bracket
8 210200 1 Belt Tensioner
9 210202 1 10" Belt Sheave (includes setscrew 34325)
10 210443 1 10" Double Pulley
11 31226 1 Sheave Bushing
12 261698 1 Engine Mount Platform
13 261700 1 Center Support Bracket
14* 210162 1 Gearbox
15 34009 6 3/8 Flange Nut
16** 34336 3 5/16 x 1 Flange Bolt
17 34099 11 5/16 Flange Nut
18 34317 2 5/16 x 1-1/4 Carriage Bolt
19** 34072 1 5/16 Stover Locking Nut
20 34222 2 5/16 x 1-1/4 Bolt
21 34034 2 1/2 Nut
22 34094 1 1/2 Washer
23 34254 1 1/2 x 2 Bolt
24 34275 4 5/16 x 1 Carriage Bolt
25 34141 2 3/8 x 3/4 Carriage Bolt
26 34328 1 5/16 x 3/4 Flange Bolt
27 34224 2 3/8 x 1-1/4 Bolt
*NOTE: This GEARBOX part number is for the ENGINE DRIVE system only; a different gearbox part number is
specified for the PTO Drive units (please refer to Section A in the Operator's Manual).
**NOTE: The IDLER BRACKET must be able to ROTATE to tension the belt; DO NOT overtighten the specified
hardware (item #'s 16, 19) . Millcreek recommends that you just tighten these hardware components, then loosen
1/4 turn to allow for proper movement.