1. This machine should be installed in a vehicable with 12V . Do not install it to trucks or
buses with 24V battery.
2.Do not install this machine in places impeding driver ’s vision or impacting driving.
3.In order to avoid traffic accidents caused by distracting drivers’ attention, drivers are
not allowed to operate this machine or view the screen during driving, please park the
vehicle in safe places.
4. Do not place this machine, vehicle augments or speakers under humid or wet
environment, otherwise, it will cause electric short circuit and then lead to distaser
or other damages.
5.Do not change fuse device on power connector attached to this machine, for
unmatched fuse will lose over-current protection on this machine, which may burn
this machine or even arouse fire disaster.
6.If there’s no sound, no image, or there is water or small impurities leaking into the
machine, or there comes smoke and smell, please stop using this machine, and send it
to the after-sale service center; otherwise, it may cause fire disaster or other accidents.
7. Please adjust the volume to a proper extent during driving, for overloud volume may
interfere drivers’ listening to information outside the vehicle.
Tips
1.When there’s any abnormal phenomenon in this machine during operation, please refer to solutions in “
Troubleshooting Guide” in this instruction, if no solutions could be found, please press the [Reset] button on
the panel with a sharp tip, to reset the machine to factory status.
2. When machine panel and TFT LCD are dirty, please wipe with soft cloth or neutral detergent; while hard cloth
or diluents like alcohol etc. may scratch the panel or make texts disappear.
3. Please do not touch the display with hard materials to avoid damaging the screen
4. This machine is composed of parts of high precision, please do not dismantle the cover or tune any part by
yourself, please come to nearby professional after-sale service center for repair.
5. Strong impact on the machine shall be avoided, for this will damage mechanical parts of the machine.
6. When temperature inside the vehicle is too high or too low, please adjust temperature first, and then use this
machine.
7. After using the heater for cold weather, there will be dew (water) inside the player, in this case, do not play the
disc, take it out, and use it after removing the dew from the player. If it could not be played normally after
several hours, please contact the dealer.
8. Discs with irregular shapes could not be inserted into this machine, otherwise, it will cause machine core failure.
9. Illustrations shownin this instruction are to illustrate how to control in a clearer way, so display interface in these
illustrations may be slightly different from actual interface of this machine, and illustrations of some display
screens may not be realized during actual operation.
10.During operation, when occurs on screen, it indicates that this operation is not supported by this
machine or the current operation is invalid.
11. Please operate this machine according to user manual, and any damage caused by illegal operation is not in
warranty scope.
Safety Notes
2
3
Prouduct Parameters
Содержание D2105
Страница 1: ...D2105 ...