1. Hold ‘SET’ until dXXX blinks.
2. Choose the address by pressing ‘+’ or
‘
-’, there are totally 512 addresses.
3. After choosing the address, hold ‘SET’ until dXXX stops blinking.
5. Set the Address
Link:
Choose the zone for the DMX light bulb first by pressing ‘+’ or ‘-’, e.g. ‘CH12’ means
zone 12. Turn off the DMX light bulb, turn on again, within 3 seconds press SET three
times, the light bulb blinks slowly three times with green color, now the light bulb is
linked in zone 12, there are totally 16 zones.
UNLINK:
Turn off the DMX light bulb, turn on again, within 3 seconds press SET five times, the
light bulb blinks quickly 10 times with red color, now the unlink is done.
6. LINK/UNLINK
4. How to Use
8.8.8.8
+
SET
-
DMX512
Control Panel
Connect
DMX512 Transmitter
2.4GHz Wireless Signal
1 Zone
2 Zone
Limitless
Limitless
15
Zone
16
Zone
Limitless
Limitless
