Projector Applications
AV Program Playing
This projector can play external program through AV port or VGA port.
1. AV cable end (f1) connects to AV port (7);
2. AV cable end (f1) connects to AV source;
Take iPod as an example, Projector can connect with iPod through special
iPod connector (not included).
3. Supply power with adapter (f4) or Battery;
4. Turn on Power Switch. Then Turn on Projection Switch. Detailed operation
please refer to the Projector Operation Procedure;
5. Adjust volume with Volume Up/Down;
6. Adjust focus with Focus Dial.
VGA Program Playing
Remote Control User Guide
1. Power supply with A/C adapter or battery;
2. Connect the projector with VGA input source through VGA cable
connector (f2);
3. Following similar steps with AV Program Playing.
Introduction to Key Buttons
PWR: Power on, click this button once.
Power off, click this button twice.
: Press the bottom to switch into mute mode.
MENU: Use this button to enter the main menu.
This button also can be used for returning to main menu when you are in the
sub- menu.
Main menu has two submenus, which are listed as below:
DISPLAY:
Contrast
Brightness
Saturation
Tint
Color temperature
Recall (Restore system default settings)
SYSTEM:
