background image

Mini Digital Amplifier

 

 

Preface 

Read this user manual carefully before using this product. Pictures shown in this 
manual is for reference only, different model and specifications are subject to real 
product. 

This manual is only for operation instruction only, not for any maintenance usage.   

 

Trademarks 

Product model and its logo are trademarks. Any other trademarks mentioned in this 
manual are acknowledged as the properties of the trademark owner. No part of this 
publication may be copied or reproduced without our prior written consent. 

 

FCC Statement 

This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. It has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a commercial 
installation.   

Operation of this equipment in a residential area is likely to cause interference, in 
which case the user at their own expense will be required to take whatever measures 
may be necessary to correct the interference 

Any changes or modifications not expressly approved by the manufacture would void 
the user’s authority to operate the equipment. 

         

           

     

Содержание Pro MP-A2B

















Отзывы: