4K HDBaseT 6x6 Matrix Switcher
21
Command
Function
Feedback Example
/+[Y]/[X]:******.
Set communication between PC and
HDBaseT receiver.
①
Y is for RS232 port (connect with
RS232 port of HDBaseT receiver)
a.
Y = 1~6, send this command to the
corresponding HDBaseT receiver to
control far-end device.
b.
Y = 9, send this command to all
HDBaseT receivers to control all
far-end devices.
c.
Y = A~F, send this command to the
corresponding HDBaseT receiver
connected to HDBT OUT 1~6 when
the switcher is powered on
d.
Y = G~L, send this command to the
corresponding HDBaseT receiver
connected to HDBT OUT 1~6 when
the switcher is powered off
②
X is for baud rate, its value ranges
from 1 to 7 (1--2400, 2--4800,
3--9600, 4--19200, 5--38400,
6
—57600, 7--115200)
③
***** is for data (max 48 Byte)
******
EDIDH[x]B[y].
Input port [y] learns the EDID from output
port [x].
If the EDID data is available and the audio
part supports not only PCM mode, then
force-set it to support PCM mode only. If
the EDID data is not available, then set it
as initialized EDID data.
EDIDH[x]B[y]
EDIDPCM[x].
Set the audio part of input port [x] to PCM
format in EDID database.
EDIDPCM[x]
EDIDG[x].
Get EDID data from output [x] and display
the output port number.
Hexadecimal
EDID
data
and carriage
return character
EDIDMInit.
Restore the factory default EDID data of
every input.
EDIDMInit.
