Compact Scaler Switcher
8
1. In auto-adjusting mode, MP-SC-5D will choose the resolution of the display device as
the preferred resolution.
2. In auto-switching mode, front panel button control is not available, but IR and RS232
control is able to switch modes.
4.1.2 Switching Operations
Support auto-switching and manual-switching. Press and hold on
SOURCE/AUTO
button for
7 seconds or more
to enter in auto-switching/manual-switching mode.
The display result is showed as below:
The display result will be showed for
2 seconds
.
The auto-switching mode follows the listed principles:
New input principle
Once detecting a new input signal, MP-SC-5D would switch to this new signal
automatically.
Power rebooting principle
MP-SC-5D offers the function to remember the signal last displayed when rebooting.
Once rebooting, MP-SC-5D will automatically enter in auto-switching mode, and
then detect all inputs and memorize their connection status for future rebooting
using.
And if the signal last displayed is still available, then MP-SC-5D will output the signal.
If not, there will be no signal on outputs.
Signal removing principle
Once removing the current display signal, MP-SC-5D will detect all input signals with
priority (from INPUT 1 to INPUT 5). It will output the signal firstly detected to be
available.
Notice
: Auto-switching function works only when there is new input signal, or when
users remove a signal or power rebooting. With any VGA port set to AV or YPbPr, the
system will be not able to enter in Auto-switching mode.
Operation Examples
:
Connect the INPUT 2, INPUT 4, and INPUT 5 ports to the source devices, select
INPUT 4 to outputs.
Press and hold on the front key
SOURCE/AUTO
for
7 seconds or more
to enter in
IN: HDMI1 AUTO
1280 X 720
IN: HDMI1 MANUAL
1280 X 720
Auto-switching function
