Phone: 91-79-55310266 / 55124898 (M) 0-98253-50221
www.interfaceproducts.info
A. Manual Mode Installation:
Selection of Manual mode:
To use the switcher in manual mode keep slide switch on manual mode on back panel of
the unit.
Local Keypad:
Select the required channel from the front panel keypad.
Remote contact closure / remote keypad
Rear panel has a D9 Male connecter, where you can connect Milestone RF/IR/ cable
through remote contact closure or you can connect programmable any other key pad or
remote which is available in market.
The connecter diagram for D9 male connector is as follows:
D-9 Male
Channels
1
CH1
2
CH2
:
:
:
:
8
CH8
9
GRD
Note : to select channel 1, short 1 and 9 through contact switch or use Milestone’s
remote keypad / RF remote controller / IR remote controller.
Remote RS232 Interface
D9 female connector from rear panel is used for selecting the switcher through RS232
interface.
3
