Milestone MacroPATH Basic QX Series, Руководство оператора

Страница: 57 / 128

MacroPATH and MacroPATH Basic QX Series MM161-001
– Operator Manual
57
If you press the button, Notepad opens automatically.
It is also possible to customise the “Exit” button in the “Customize exit button for already running processes”
section.
Under “Process” add the name of the program to be highlighted, import the .png image to “Image” that will
replace the button image, Exit and under “Label” enter the desired name for the new button.
When the "Exit" button is pressed, the program will be highlighted (only in cases where it has been
minimised on the status bar).
If the following checkbox is enabled:
when the exit button at the top of the screen is pressed, MacroPATH is minimised but not closed.
However, if the button is held down for at least 3 seconds, MacroPATH is closed.
You can enable this checkbox when MacroPATH is opened directly by its button (not by an external program
or an application) or also when MacroPATH is started from the command line.
However, you cannot enable this checkbox when working as a Twain device. In this case if you wish to
minimise MacroPATH upon exit, you are prompted to select the “Volatile” mode in “Settings
→ Third party” in
the Twain section.