After installation, the surveillance system runs on licenses that need to be activated before a certain period
ends. This is the grace period. Once the installation is complete, you can get an overview of your licenses for all
installations with this SLC on the Basics > License Information node in the Management Client.
Milestone recommends that you activate your licenses before you make the final adjustments.
l
For online activation, log in to the Software Registration page with your My Milestone account on the
Milestone website (
https://online.milestonesys.com/
).
l
For offline activation, you must export a license request (.lrq) file in the Management Client, and then log
in to the Software Registration page and upload the .lrq file.
Once you have uploaded the .lrq file, Milestone emails you an activated .lic file for import.
Prepare your unit
Always place the unit on a shelf or use rails to support the chassis.
1. Connect your peripherals: mouse, keyboard, display and audio.
2. Connect your local area network with internet connection, if available, to a NIC port. This network is for
management and viewing.
3. Connect your camera network to a different NIC port. If your unit is equipped with a higher bandwidth
network card, connect your camera network to the this network port.
4. Connect all power cables and plug them into a power socket.
Getting started and maintenance guide | Milestone Husky IVO™ 150D
13 | Before you install
