XCB1U
Installation Instructions
8
2.
Align the center of the interface bracket (DD) with center of
screen. (See Figure 6)
NOTE:
The diamond-shape hole in the bracket corresponds to
the center of the mount.
Figure 6
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display. Properly sized
screws will easily and completely thread into display
mounting holes. If spacers are required, be sure to use longer
screws of the same diameter.
3.
Select correct screws, spacers (if necessary) and universal
washers from the hardware bag (A-N) and attach brackets
(DD) to back of screen. (See Figure 6)
IMPORTANT ! :
The M8 screws do
NOT
require a
washer. Use the universal washer (N) only with M4, M5
and M6 screws.
NOTE:
The nesting spacers (M) may be used separately, or
put two together in different configurations to create
different size spacers. (See Figure 7)
Figure 7
Attaching Displays to Ceiling Mount
1.
Ensure that the latch mechanisms on interface brackets
(DD) are already lowered. (See Figure 5)
2.
While supporting both sides of display, lower display onto
ceiling mount, hooking top of interface brackets onto front of
ceiling mount. (See Figure 8)
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! The displays MUST
be centered on each side of ceiling mount.
Figure 8
3.
Raise the latch mechanism on both interface brackets to
lock display in place. (See Figure 8)
bracket
(N)
(M)
(A-L)
(DD)
3
2
Center of
(Single)
(Nested)
(Stacked)
0.375
[9.5]
0.563
[14.3]
0.750
[19.1]
2
3
3
Latch
mechanism
(Near mounting
rail not shown
for clarity)
Содержание Chief XCB1U
Страница 11: ...Installation Instructions XCB1U 11...
