HDBaseT Extender Set
2
Package List
1x Transmitter
1x Receiver
4x Mounting Ears with 4 x Screws
8x Plastic Cushions
2x 3-pin Phoenix Connector
1x Power Adaptor (24VDC,1.25A)
1x User Manual
Panel Description
Transmitter
Receiver
No.
Name
Description
①
RS232 MODE switcher
CTRL: RS232 pass-through control mode;
UPDATE A: Update Valens IC program, connect a PC to the
RS232 port, and then double-click the update file (.bat).
UPDATE B: Update compression IC program, the upgrade
method is the same as the above UPDATE A.
②
Link status LED
OFF: No Link; GREEN:Link successful.
③
HDCP compliant LED
OFF: No HDMI traffic (no picture); GREEN: Traffic with HDCP;
Blinking: Traffic without HDCP.
④
Power LED
OFF: No power; RED: DC power present.
⑤
RS232 connectors
If one is connected with control device (e.g. PC), and the other
should be connected with the third-party that need to be
controlled.
⑥
IR IN
Work with far-end IR OUT port, connect with IR Receiver (with
carrier) to collect IR signal to control far-end display device from
local.
⑦
IR OUT
Work with far-end IR IN port, connect with IR Emitter to send IR
signal to control input source device from remote.
⑧
HDMI IN (Transmitter)
Connect with HDMI source.
HDMI OUT (Receiver)
Connect with HDMI display.
⑨
HDBT OUT (Transmitter)
Connect to the HDBT IN socket on Receiver via CAT5e/6a/7
cable.
HDBT IN (Receiver)
Connect to the HDBT OUT socket on Transmitter CAT5e/6a/7
cable.
RS232
IR IN IR OUT
HDMI IN
HDBT OUT
ETHERNET
ETHERNET
DC 24V
RX
TX
HDCP
LINK
TX
UPDATE B
UPDATE A
CTRL
1
2 3 4
5
6 7
8
9
10
11
RX
TX
HDCP
LINK
RX
UPDATE B
UPDATE A
CTRL
1
2 3 4
5
6 7
8
9
10
11
RS232
IR IN IR OUT
HDMI OUT
HDBT IN
ETHERNET
ETHERNET
DC 24V
