4K Presentation Switcher with Soft Codec & Matrix Outputs
31
7.2 Display Setting Tab
①
RS232
✓
Baud Rate:
Supports 2400, 4800, 9600, 19200, 38400, 57600, 115200.
✓
Command Ending:
NULL, CR, LF and CR+LF are selectable.
✓
Display On:
Enter the RS232 command to turn on the display.
✓
Input Delay:
Enter the delay time in seconds between the display on and display
input select commands. This delay may be between 1 and 100 seconds.
✓
Display Input Select:
Enter the RS232 command to switch to the input which is
connected to the receiver.
✓
Display Off:
Enter the RS232 command to turn off the display devices. Click
to turn off the display devices twice.
✓
Display Offx2 Delay:
Enter the RS232 command to set the interval between the two
Display Off commands.
✓
:
Enter the RS232 command to turn up the display volume.
✓
Volume-:
Enter the RS232 command to turn down the display volume.
Finally
，
click “Save” to save the settings
