Scaler Switcher with Digital Amplifier-TN
16
same with the router. Please connect like the following figure for LAN control.
Step1.
Connect the TCP/IP port of MP-SC-12D-TN to Ethernet port of PC with twisted
pair.
Step2.
Set the PC
’s IP address and gateway to the same IP section as
MP-SC-12D-TN
’s. Do remember the PC’s original IP address and gateway.
Step3.
Set MP-SC-12D-TN
’s IP address and gateway to the same IP section as the
router
’s.
Step4.
Set the PC
’s IP address and gateway to the original one.
Step5.
Connect MP-SC-12D-TN and PC(s) to the router. PCs in the same LAN are
able to control MP-SC-12D-TN
asynchronously
.
The HDBT port of MP-SC-12D-TN is used for TCP/IP control. And all the control
commands are the same as the RS232 command list. Here is the detailed introduction.
4.4.5.
Control MP-SC-12D-TN via TCP/IP communication software
(Exampled by TCPUDP software)
1)
Connect a computer and MP-SC-12D-TN to the same network. Open the TCPUDP
software (or any other TCP/IP communication software) and create a connection,
enter the IP address and port of MP-SC-12D-TN (default IP: 192.168.0.178,
port:4001):
Router
Internet
PC
CAT5e
MP
SC
12
D
TN
-
-
-
