Milestone pro MP-MUH2-42T, Руководство пользователя

Страница: 10 / 41

4x2 Matrix Switcher
7
5. Button Control
5.1 Manual Switching
When the switcher is in manual switching mode, the Auto button LED goes out. Please
follow the below steps to switch input source to output channel.
1) Press Select button at Out A block to select input source for H HDMI
output A, and the corresponding source LED turns green.
2) Press Select button at Out B block to select input source for H HDMI
output B, and the corresponding source LED turns green.
5.2 Auto Switching
Press and hold Select button at least 3 seconds at Out A block to enable auto
switching mode for output A, and then the Auto LED will turn green.
Press and hold Select button at least 3 seconds at Out B block to enable auto
switching mode for output B, and then the Auto LED will turn green.
When in auto switching mode, the switcher will switch according to the following rules:
⚫
The switcher will switch to the first available active input starting at input 1 to 4.
⚫
New input: The switcher will automatically select the new input once detecting a
new input.
⚫
Reboot: If power is restored to the switcher, it will automatically reconnect the input
before powered off.
⚫
Source removed: When an active source is removed, the switcher will switch to the
first available active input starting at HDMI input 1.
⚫
Detection method: TMDS or 5V (The default is 5V and it can be selected by RS232
commands).
⚫
The current input source can be switched by Select button on front panel, IR
remote and RS232 commands, and the switcher doesn’t exit the auto switching
mode.
Note: In auto switching mode, press and hold the Select button at least 3 seconds to
enable manual switching mode, but the input source will not be switched.