Mini Audio Amplifier
12
4.4 TCP/IP Control
MP-A250B boasts option TCP/IP port for IP control.
Default settings: IP: 192.168.0.178; Subnet Mast: 255.255.255.0; Gateway: 192.168.0.1;
Serial Port: 4001.
IP& gateway can be changed as you need, Serial Port cannot be changed.
Connect the Ethernet port of control device and TCP/IP port of MP-A250B, and set
same network segment for the 2 devices, users are able to control the device via
web-based GUI or designed TCP/IP communication software.
4.4.1 Control Modes
MP-A250B can be controlled by PC without Ethernet access or PC(s) within a LAN.
Controlled by PC without Ethernet access
Connect a computer to the TCP/IP port of the MP-A250B, and set its network segment
to the same as the MP-A250B’s.
Controlled by PC(s) in LAN
Connect MP-A250B, a router and several PCs to setup a LAN (as shown in the following
figure). Set the network segment of MP-A250B to the same as the router’s, then PCs
within the LAN are able to control MP-A250B.
9[x][x]%
Preset the treble level, [xx] can be 00~10,
11 degrees in total.
Treble of LINE: 7
GetIP;
Get the IP of the device
IP: 192.168.0.178
Same network
segment as the
switcher
