8
information and settings of the device will be shown on ToolBox App if it’s recognized
successfully. You can read and configure the device by tapping the Read/Write device on the
App. To protect the security of the device, password validation is required when first
configuration. The default password is
123456
.
Note:
1) Check the NFC area of your smartphone and it’s recommended to remove the phone case.
2) If the smartphone fails to read/write configurations via NFC, move the phone away and back
to try again.
3) WS558 can also be configured on ToolBox via a dedicated NFC reader provided by Milesight
IoT.
3.1.2 USB Configuration
1. Download ToolBox software from www.milesight-iot.com.
2. Connect the device to a computer via the Type-C port. Please note that do not touch the
power interface, switches and other wirings to avoid electric shock.
3. Open the ToolBox and select type as “General”, then click password to log into the ToolBox.
(Default password:
123456
)
