13
D. Go to “Network Server”
→
“General” page to enable the network server and “Milesight IoT Cloud”
mode.
E. Log in the Milesight IoT Cloud. Then go to “My Devices” page and click “+New Devices” to add
gateway to Milesight IoT Cloud via SN. Gateway will be added under “Gateways” menu item.
F.
The gateway is online on Milesight IoT Cloud. After that you can add node devices to cloud directly.
9. Connect UG63 to UG65/UG67
Milesight UG6x LoRaWAN
®
gateway can set up multi-gateway architecture, which can make different ga
teway failover each other and extend signal coverage, while make one node device
roams in multiple gateways. One UG65/UG67 gateway can be used as network server and other UG6x
series gateways can be used as packet forwarder and transmit all data to the main gateway.
