Milesight MS-N1000 Series, Руководство пользователя

Страница: 85 / 98

User Manual
www.milesight.com 81
SSH Port Setting
Secure Shell (SSH) has many functions; it can replace Telnet, and also provides a secure channel
for FTP, POP, even for PPP.
1. Check the SSH Enable checkbox to enable the feature.
2. Please modify SSH ports according to actual application.
Note: The default SSH port is 22.
HTTP Port Setting
The default HTTP port is 80. Please modify HTTP ports according to actual application.
Notes:
1. The default HTTP port for IE browser is 80.
2. HTTP port is used for remote network access.
RTSP Port Setting
Real Time Streaming Protocol (RTSP) is an application layer protocol in TCP/IP protocol system.
The default RTSP port is 554. Please modify RTSP port according to actual application.
Note:
1. RTSP port is used for remote network live view.
2. RTSP port valid range is 554 or 1024~65535.
Service Port Setting
Service port is used to remote access when add NVR by mobile device.
The default RTSP port is 1100. Please modify RTSP port according to actual application.
Note:
1. You can add this port when using P2P/prot mapping/LAN IP to add NVR.
2. When port mapping, you still need map 554 to 554. Only then you can use 1100 to watch
the live view by remote WAN.
3.8.3 Disk Management
3.8.3.1 Disk Configuration
Steps: Enter disk configuration menu by clicking Main Menu

System Settings

Disk
Management
→
Configuration
Configuration page contains the basic information of the disk, see F-3.8.8. Select a disk and click
[Format] to format the disk.