Milesight Technology MA-C3356-PA, Руководство пользователя

Страница: 93 / 106

87
start detecting the license plate.
Step2: Check the checkbox “Enable License Plate Recognition”, you can draw the screen to select
area interested.
Step3: Schedule Settings. You can draw the schedule by clicking Edit button.
Table 4-5-16 Description of the buttons
Parameters Function Introduction
License Generated by camera’s information
License Status Show present license status, including Valid, Invalid.
Processing Resolution
Resolution of the stream for LPR analysis, including 1920*1280, 1280*720,
640*360, 320*176.
Enable Day/Night
Detection Mode
(Only for Korean version)
With this option enabled, the camera will enable different detection modes
according to Day/Night mode.
Add
(Only for Korean version)
Draw the screen to select the area interested, then click “Add”button to add
the area,only four recognition areas can be added.
You can edit the name of the area or delete the area in the list below.
Note: Only license plates larger than 150 pixels can be recognized.
Clear
(Only for Korean version)
Click the "Clear" button to clear the area being drawn.
Delete All
(Only for Korean version)
Click the "Delete All" button to delete all the added areas.
Enable LPR Message Post
Check the checkbox to enable LPR Message Post. It will push information to
some third-party devices or softwares that are compatible with ours.
Post Type
Information can be pushed by RTSP or TCP .
List Management
Add the license plates to this interface as Black or White type (Black/White List), and then you can
set the alarm action for these license plates in the corresponding black list mode or white list
mode interface. When these license plates are detected, the camera will respond accordingly to