MilDef Crete DR13, Руководство пользователя

Страница: 18 / 56

Chapter Two - 7
Operating Information
Working with Power Button
Always turn on your device by using the power button. Press the power button about 2
seconds and the laptop will boot up. The device is equipped with a heater kit to enable work
under low temperature. The heater will heat up the LCD to the temperature for booting up
the system. Also, the heater will constantly monitor LCD temperature. Once the
temperature becomes lower, the heater will heat up again to maintain the temperature for
operation.
Note:

When ambient temperature is under -15 °C (the default setting for your tablet
computer), the system may not boot up immediately. System will beep with Heater
LED light flashing orange to indicate that the heater is in operation. After 3~10 minutes
(depending on the ambient temperature), the system will boot up automatically.

In emergency situations, you can skip the heating process by pressing and holding the
power button for 9~11 seconds then release. The speaker will beep with a special
sound to signify that the heating process has been skipped (Please note that not all
devices are guaranteed to work properly in this case).

Press the power button again during the heating process will shut down the computer.
The following is a list of functions associated with your tablet computer’s power button:
1. Press and hold for 9 ~ 11 seconds:
The system will skip heating process and force boot up.
2. Press and hold for 5 ~ 8 seconds:
Enable/Disable the sound of Heater.
3. Press and hold for 4 seconds under OS:
Shut down the system.
4. Press and hold for 2 seconds:
Boot up the system.
5. Press the power button for functions including:
a. Power on the system.
b. Force Shut Down.
c. Sleep/Hibernate (Dependent on OS settings).