Chapter 5 - 38
Maintenance and Service
Chapter 5 - Maintenance and Service
Cleaning
ALWAYS turn off the power, unplug the power cord and remove the battery before
cleaning.
The exterior of the device and display may be wiped with a clean, soft, and lint-free cloth. If
there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to the
cloth and wipe clean.
An air gun is recommended for cleaning water and dust. For salty water please clean with
fresh water then blow-dry with an air gun. Be sure not to turn the computer up-side down
while there is water being applied.
Troubleshooting
Should the computer fail to function properly, this section presents common problems and
the solutions. If troubleshooting solutions are unsuccessful, please refer to RMA Service
section below.
Power Problems
Power
Problems
When I turn on the Handheld computer, it does not respond.
-
If you are using battery power, check if the battery is charged
-
If you are using AC power, ensure that the connection of AC
adapter is correct.
I cannot return from Hibernation while on battery power
-
The battery might be drained. Please plug the Handheld into AC
power.
