4.
Installation
It is easy to install the Milan Vortex Wireless Repeater.
Figure 1: Milan Vortex Wireless Repeater
Step 1: Press and release the cover tab to open the cover and plug in the micro USB power adapter. The
LED will now begin to flash slowly
Step 2: Integrate the Milan Vortex Wireless Repeater with a Milan Infoway
a.
Ensure that the Milan Infoway is functional
b.
Open Milan Infomap configuration tool in a web browser (see separate instructions for using
this software)
c.
Click on the “Security” tab from the Milan Infomap menu
d.
Click on the “Wireless Security” tab from the Milan Infomap menu
e.
Click the “Add” button
f.
Press the Program Switch (see Figure 1) at the bottom of the device twice in quick
succession
g.
Check if this device has been added to the list of wireless devices in Milan Infomap (when
successfully added you will see the Product Name, Manufacturer, Product Type and the
Node ID)
h.
If the device has not been added to Milan Infomap, please repeat steps f and g above
ensuring that the Milan Infomap is still in the Add mode in the Wireless tab
i.
Should you ever need to remove this device from your Milan DLE, please follow the same
steps as above except select the “Remove” button in step e above
Step 3: Plug in the Milan Vortex Wireless Repeater where a Z-Wave signal boost is necessary to extend
its range. You can now experience the benefits of Milan DLE offered by this product.
