3.
Installation
To install the Power over Ethernet Injector, please follow these steps.
1. Use RJ-45 cable from the
Data in
port on the Power over Ethernet
Injector to the Switch/HUB.
2. Use RJ-45 cable from the
Data out
port on the Power over Ethernet
Injector to the PoE Splitter, PD (Such as Router, Access Point…etc.) or
PoE Hub.
3. Plug in the power cord of the Power over Ethernet Injector to the
appropriate power source.
4. Before starting, make sure all connections are correct.
Содержание MIL-L100i
Страница 1: ...MIL L100i Single Port Power over Ethernet Injector USER GUIDE...
Страница 9: ...90000430 Rev B...