Milagrow MPR1B 40, Руководство пользователя

Страница: 3 / 21

RoboPhelps 40 Commercial Robotic Pool Cleaner
Please read this manual carefully before using the RoboPhelps 40
Before performing maintenance or service on the RoboPhelps 40 please
esure the power is disconnected to avoid personal injury or property loss.
The RoboPhelps 40 is designed for use in swimming pools only. Any other
use is prohibited and will void manufacturer’s warranty.
Do not allow the Power Box to come in contact with water, and it is
recommended to be placed in a shady, dry and ventilated area.
Do not swim in the pool whilst the RoboPhelps 40 is in use in order to
avoid personal injury.
When in use, the Power Supply and Caddy Cart must remain 3 meters
away from the edge of the pool.
Do not use the RoboPhelps 40 if there is a chance of thunder storm to
avoid personal injury.
Users are only permitted to perform maintenance described in this manual.
Any tampering with the Motor Box or Power Supply will void the warranty.
Ensure the RoboPhelps 40 is fully submerged before turning the power
box on.
If the RoboPhelps 40 is not going be used for a long time, make sure to
disconnect the power. keep it clean and put it in a safe, dry and
well - ventilated area.
If the RoboPhelps 40 stops working, please refer to section 6
“Troubleshooting”. If you cannot find the root cause, please contact
your company engineer.
0
The optimum working temperature for the RoboPhelps 40 is between 10 C
0
and 32 C, avoid direct sunlight when not in use.
The RoboPhelps 40 is suitable for the swimming pools no deeper than 3
meters.
Lift the RoboPhelps 40 out of the water using the robot handles, do not lift
the RoboPhelps 40 using the floating cable. Lifting via the cable voids
warranty.