AguaBot 5.0 Maintenance
Aguabot 5.0
M I L A G R O W
Clean Side Brushes
Check side brushes for damage or foreign
object on the brush.
Clean the side brushes.
To replace, pull out the side brushes
Replace brushes with new ones
Push the new brushes in place for snap fit
A.
B.
C.
D.
E.
Clean Dust Bin and Filters
Press "PUSH" to open the dust bin cover on the robot main unit.
Take out the dust bin.
Pull out dust bin top cover and take out the primary filter.
Note: After taking out the dust bin, check if there is any foreign object stuck or blocking the
vacuum inlet passage. Clean it if required.
Separate HEPA filter from dust bin.
Empty the dust bin and wipe the dust.
Wash the dust bin with water. Clean filters with cleaning brush tool
HEPA filter can be washed with cold water. After washing, dry the same but not under
direct sunlight.
Install the primary filter and HEPA filter into the dust bin. Close the dust bin cover and install
it into the robot main unit.
Note: 1. Install both HEPA and primary filters when the dust bin is dry.
2. Do not place HEPA and primary filters directly in the sun.
3. The Dust bin & filters (including HEPA and filter) could be replaced if needed.
A.
B.
C.
D.
E.
F.
G.
H.
10
A
B
C
D
E
F
G
H
