1.
2.
3.
4.
5.
6.
The device can be mounted in several ways: wall, ceiling, pole or it can be placed in a specially designed Mikrotik holder that comes with the package. The
package includes a drill hole template with instructions, to help you with the Ethernet cable installation and attachment to a ceiling or a wall. The package
also includes a steel bracket to put on the other side of a dropdown ceiling tile and two screws and wall anchors. The Unit can be attached to the pole
using zip ties or steel clamp.
To prevent the bottom lid from opening a different screw can be used. One Torx T20 security screw is included for optional use. Use it with the included L-
shaped wrench to fix it into the bottom lid. Detailed instructions for replacing the screw are in the package.
When using and installing this device please pay attention to Maximum Permissible Exposure (MPE) safety distance with a minimum of 31 cm between the
radiator and your body.
Mounting on the mast or pole:
* It's recommended to use electrical tape to increase friction between materials.
Mount plastic tie straps to steel brackets guiding them through holes.
Mount bracket to the device.
Secure them with a screw.
Mount and align the device on the pole or mast.
Guide Ethernet cable through the opening and connect to the Ethernet port.
Close bottom latch and secure with a screw.
