See www.routerboard.com for more information. Contact [email protected] for support questions.
08/08/14
Mounting
The QRT box contains several parts that need to be
assembled. Please follow this process:
Start by attaching the two pole brackets (A) to the
swivel adjuster (B), by using the four provided screws (use a PH1
screwdriver).
Next, put the two U-‐bolts (C) around the mast or pole, and guide them
through the holes on the swivel adjuster (D). Then, tighten the U-‐bolts,
each with one regular washer, one spring washer, and one nut, as shown
in the image to the right. All nuts need to be tightened using a size 10
(3/8 in) wrench.
Now take the mounting bracket (E), and put it on to the back of
the antenna. Use one rubber ring, one washer, and one nut for
each of the built-‐in bolts (in that order).
A
B
C
D
E
