Boot configuration jumpers
Default jumper configuration for MikroTik RouterOS boot:
MiniPCIe slot usage
Installing a miniPCIe module should be done by a qualified person, please follow safety precautions when handling
electrical equipment:
1. Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical
discharge (ESD) damage.
2. Place PCB board on the anti-static mat.
3. Locate the miniPCIe slot on the PCB and remove two factory attached screws.
4. Attach a thick thermal pad to the card, and install the card into miniPCIe slot so that thermal pad is
between PCB and card.
5. Secure card in place using previously removed two screws.
6. Attach the grey uFL connector to the MAIN antenna connector of the modem, attach the black cable to the
secondary (or AUX) connector.
7. Attach a thinner thermal pad to the top of the card.
Slide in the SIM cards from your mobile operator into the SIM slots. The slot accepts miniSIM (2FF).
Buttons and jumpers
RouterBOOT reset button.
This button has the following functions:
•
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS
configuration (total 5 seconds).
•
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAPs mode (total 10 seconds).
•
Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD
look for Netinstall servers (total 15 seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Accessories
Package includes the following accessories that come with the device:
•
K-25 set.
Specifications
For more information about this product, specification and pictures please visit our web page:
https://mikrotik.com/product/rbm33g
Operating system support
The device supports RouterOS software version 6. The specific factory installed version number is indicated in the
RouterOS menu
/system resource
. Other operating systems have not been tested.
See mikrotik.com/products for the latest version of this document.
Document #50468 Modified on: 13.SEP.2019
