Antenna usage
To connect to the external antenna please use, the "Flex-guide" - can be obtained separately. A super low loss 50cm long RPSMA cable for superior
connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.
https://mikrotik.com/product/ACRPSMA
SMA connectors located under the upper cover (see "
Please connect and disconnect the antenna, when the device is turned off!
Wireless interface configuration information on the web:
https://wiki.mikrotik.com/wiki/Manual:Interface/Wireless
Specifications
For more information about this product, specifications, pictures, downloads and test results please visit our web page:
https://i.mt.lv/cdn/rb_files/NetBox-1566373542.pdf
- RB911G-5HPacD-NB-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- RB911G-5HPacD-NB (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
Operating system support
The device supports RouterOS software version 6.44.5 The specific factory-installed version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
Compliance Information
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this
product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for
making sure, that Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble,
repair, or modify the device.
