The device is designed to be used outdoors and mounted on the dish, with Ethernet cable connecting to the back of the unit.
Please ensure to mount the LDF unit on the offset mount in the proper position - unit facing upwards to the dish.
The dish will act as a reflector, amplifying the signal. The final position of your assembly should be placed and installed on the pole. For pole mounting
instructions please refer to your dish mounting instructions.
Please ensure that cable feed is pointing downwards.
The IPX rating scale of this device is IP54.
Mounting and configuration of this device should be done by a qualified person.
Sim slot usage
Extension slots and ports
One Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X), so you can use either straight or cross-over cables for
connecting to other network devices.
MiniPCIe slot with an integrated modem.
Mode button.
Reset button
The reset button has three functions:
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
Warning! This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body. Operation of
this equipment in the residential environment could cause radio interference.
Sim slot is located under the cover, please insert the micro-SIM card accordingly as shown in the picture. With the chip facing up!
