Powering
The Cube Lite60 accepts DC
⎓
power from Passive PoE injectors (one power supply and PoE injector are
included)
accepts 12-28 V DC
⎓
consuming at maximum load 4 W.
Connecting to a PoE Adapter:
1. Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.
2. Connect an Ethernet cable from your local network (LAN) to the PoE adapter.
3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Extension Slots and Ports
•
10/100 Ethernet port.
•
Integrated w60g interface with built-in antenna.
Reset button
RouterBOOT reset button has the following functions. Press the button and apply the power, then:
•
Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.
•
Release the button when the LED turns solid green to clear all configuration and defaults.
•
Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall
servers (required for reinstalling RouterOS over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Accessories
Package includes the following accessories that come with the device:
•
EU/US Switching Power Supply 24V DC
⎓
, 0.38 A, 9 W, Level VI, cable:1.5 m.
•
POE Injector with shielded ethernet cable/connector (RBPOE).
•
SXT_SQ_Mountv1.
•
K-70 Fastening set.
Specifications
For more information about SQ series products, specifications, pictures, downloads, and test results please visit
https://mikrotik.com/product/c
Operating system support
The device supports RouterOS software version 6.44.5. The specific factory-installed version number is indicated in
the RouterOS menu
/system resource
. Other operating systems have not been tested.
Notes
This device meets the Maximum TX power limit per ETSI regulations. The frequency and the maximum transmitted
power in EU are listed below: 57-66GHz: 34.92 dBm. An Operational mode in the 60 GHz band: 58.32 GHz,
60.48 GHz, 62.64 GHz, 64.80 GHz. This device is certified for outdoor use in Point to Multipoint applications.
In the following countries this device cannot be used in Fixed Point-to-Point applications:
AT
BE
BG HR CY
CZ
DK
EE
FI
FR
DE
EL
HU
IE
IT
LV
LT
LU
MT
NL
PL
PT
RO
SK
SI
ES
SE
UK
See mikrotik.com/products for the latest version of this document.
Page 4, Document #52350 Modified on: 27.SEP.2019
