mikroElektronika Serial Flash PROTO, Руководство пользователя

Страница: 2 / 4

MikroElektronika
Figure 3
: Additional board schematic
Figure 4
: Dimensions of the board
Figure 1: Serial Flash PROTO
Figure 2: Back side of Serial Flash PROTO
The function of pins provided on the Serial Flash PROTO board:
CS - Chip select
HOLD - Hold
SCK - Serial Clock
MISO - Serial Data output
MOSI - Serial Data input
VCC-3.3 - 3.3V power supply voltage
GND - Ground
How to connect the board?
The Serial Flash PROTO board is connected to other devices via the Serial Peripheral Interface (SPI). Connection is
established via a 1x7 connector CN1 provided on the additional board. Next to the CN1 connector, there are designations
indicating the function of pins provided on the additional board.
Serial Flash PROTO
The Serial Flash PROTO additional board features 8Mbit flash memory that can be used by the microcontroller or some
other device.
Key features:
- SPI communication;
- 75Mhz (max) clock signal;
- 3.3V DC power supply voltage; and
- low power consumption.