Distributor of MikroElektronika: Excellent Integrated System Limited
Datasheet of MIKROE-762 - BOARD DEV SYST SMARTGLCD 240X128
Contact us: [email protected] Website: www.integrated-circuit.com
Page 12
5. Programming with bootloader
Microcontroller is preprogrammed with USB UART Bootloader,
which can be used to upload new device firmware. To trans-
fer firmware .HEX file from a PC to MCU you need to use mikro-
Bootloader USB UART application, which can be downloaded from:
Upon download, unzip it to desired location and start the
mikroBootloader application:
http://www.mikroe.com/smartglcd/
note
Figure 5-1: mikroBootloader window
mikroBootloader software
01
When you start mikroBootloader software a window
should appear, as shown in the image above.
Before starting mikroBootloader software, connect SmartGLCD
to a PC using a USB cable provided with the package.
13 / 37
13 / 37
