LV24- v6 Development System
MikroElektronika
page
2.0. Supported Microcontrollers
The
LV24-33 v6
development system provides a DIMM-168P connector to place an MCU card into. This development system comes
with an MCU card with the PIC24FJ96GA010 microcontroller in 100-pin TQFP package soldered on it, Figure 2-3. Besides, the MCU
card alone provides an oscillator as well as 102 soldering pads connected to microcontroller pins. Each pad is marked the same as
the pin it is connected to. Soldering pads also make connection between the MCU card and target device’s modules easy.
Figure 2-1:
DIMM-168P connector
Figure 2-2:
DIMM-168P connector with the MCU card inserted
Figure 2-3:
MCU card with a 100-pin microcontroller in TQFP package soldered on it
Figure 2-4:
Schematic of the DIMM-168P connector’s pinout
DIMM-168P
connector for placing
the MCU card with
microcontroller in
TQFP package
