mikroElektronika EasyPIC v7, Руководство пользователя

Страница: 7 / 37

Easy PIC
for dsPIC30
®
v7
page 7
How to power the board?
po
w
er supply
To power the board with USB cable, place jumper J8
in USB position, and place jumper J16 in 5V or 3.3V
position. You can then plug in the USB cable as shown
on images
1
and
2
, and turn the power switch ON.
To power the board via adapter connector, place jumper
J8 in EXT position, and place jumper J16 in 5V or 3.3V
position. You can then plug in the adapter cable as shown
on images
3
and
4
, and turn the power switch ON.
To power the board using screw terminals, place jumper
J8 in EXT position, and place jumper J16 in 5V or 3.3V
position. You can then screw-on the cables in the screw
terminals as shown on images
5
and
6
, and turn the
power switch ON.
EasyPIC
™
v7 for dsPIC30
®
development board
supports both 3.3V and 5V power supply on a
single board. This feature enables you to use
wide range of peripheral boards.
Power supply: via DC connector or screw terminals
(7V to 23V AC or 9V to 32V DC),
or via USB cable (5V DC)
Power capacity: up to 500mA with USB, and up to 600mA
with external power supply
Set J8 jumper to
USB position
Set J8 jumper to
EXT position
1. With USB cable
3. With laboratory power supply
Set J8 jumper to
EXT position
2. Using adapter
1
3
5
2
4
6