Page 4
clicker for CEC1702 is a compact development board with
two mikroBUS™ sockets for click board™ connectivity.
With more than 270 click boards™ so far, you can combine
different functionalities and create without limitations.
The board carries the CEC1702, a 32-bit ARM® Cortex™
-M4 Processor Core, with strong cryptographic support. It
also contains two indication LEDs, two general purpose
buttons, a reset button, an on/off switch, a li-polymer
battery connector, a Micro USB connector.
A mikroProg connector and a 2x26 pinout for interfacing
with external electronics are also provided.
The mikroBUS™ connector consists of two 1x8 female
headers with SPI, I 2C, UART, RST, PWM, Analog and
Interrupt lines as well as 3.3V, 5V and GND power lines.
Clicker 2 for CEC1702 for CEC1702 board can be powered
over a USB cable.
Introduction to clicker 2 for CEC1702
Downloaded from
Downloaded from
Downloaded from
Downloaded from