5
RTU300 SERIES
–
HARDWARE MANUAL
WARNING!
✓
Please take care of the following issues when using Mikrodev devices.
✓
Since the unit operates with 24 VDC (12-36 VDC) voltage, you should take care of
the voltage level that the unit is connected to. If a voltage above this voltage level
is applied, the device may be damaged and may be out of warranty.
✓
Make sure that the energy connection of your device is connected to the ground or
to a properly grounded terminal.
✓
Make sure that the environment in which your device is being used is free of
moisture, electric shock, vibration and dust.
✓
Pay attention to the supply voltage and the connections of the product. Mikrodev is
not responsible for any issues due to power failure since there is no auxiliary supply
(UPS) on the device.
✓
The fuse to be used must be a FF super fast type and current limit value 1A.
✓
Do not use the device under conditions other than the environmental conditions
specified in the "Electrical Specifications" section (humidity, dust, liquid and
temperature, etc.)
✓
Removing the warranty label on the product or removing the protective case will void
the warranty.
✓
Products that are damaged, boxes have been changed and other brand labels are
affixed are not covered by the warranty.
✓
The appliance must not be cleaned with solvents (thinner, benzine, acid etc.) or with
abrasive cleaning agents.
✓
Only dry cloth should be used when cleaning the appliance.
✓
Do not open the device by removing the case of the appliance, do not interfere with
the electronic components and circuits. There is no user-replaceable part inside the
device.
✓
If there is a problem or malfunction on your device, it should only be repaired by
an authorized service. Installation and electrical connections must be made by
technical personnel in accordance with the instructions in the operating manual.
Failure to comply with these rules may result in death, serious injury or property
damage
