background image

Caution Decals on Engine

Fire hazard

Stop the engine when refueling. Fire may occur if a flame is near the tank fuel port.

Danger: poisonous exhaust gas

Carbon monoxide poisoning may occur if the exhaust gas is inhaled. Do not operate the 

machine in a poorly ventilated area.

Do not go under the lifted machine.

Do not let people or animals go under the lifted machine.

Lifting by the handle is prohibited.

Due to a falling risk, do not lift the machine by the handle.

Danger of hearing damage caused by noise

Always use ear plugs while operating the machine.

Be careful not to get burned.

Accidental burn may occur if you touch the hot parts (engine, muffler, etc.) during operation 

or immediately after the machine stops.

Be careful not to be caught in rotating parts.

Make sure the engine is stopped when removing the belt cover during a belt change.

Read the manual carefully.

Always read the operation manual and have good understanding of operation before your 

work. 

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

Fire hazard

Stop the engine when refueling. Fire may occur if a flame is near the tank fuel port.

Danger: poisonous exhaust gas

Carbon monoxide poisoning may occur if the exhaust gas is inhaled. Do not operate the 

machine in a poorly ventilated area.

Hot muffler

Do not touch the muffler and its surrounding area.

Read operation manual

For safe operation, always read the operation manual before use.

Fire, open flame and smoking prohibited.

(1)

(2)

(3)

(4)

(5)

8

Robin

Honda

WARNING

STOP

WARNING

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(

MVH-150D is excluded. 

Refer to engine instruction manual for MVH-150D.)

Содержание MVH-R60

































Отзывы: