background image

14

12

PERIODIC CHECKS AND ADJUSTMENTS

Check the machine while the engine is stopped. You may be caught in a 

rotating part and be seriously injured.

WARNING

12.1 Table Of Scheduled Checks

Regarding the check and maintenance of the engine in details, please refer to the attached engine operation manual.

Every 2 years

Replace
Replace

How often?

Place to check

Item to check

Reference

Daily

 (before starting

            operation)

Flaws, deformity, dirt
Dirt, flaws, deformation
Loose or missing parts
Flaws, deformity, cracks, breaks
Flaws, deformity, cracks, breaks

Leaks, fuel level, dirt
Leaks, wear, loose parts

Engine oil
Engine oil
Diesel Fuel

After first 50 hours

Replace

Engine oil

Engine oil

Leaks,oil level,dirt
Leaks,oil level,dirt

Fuel hose
Intake pipe

Appearance
Air cleaner
Bolts, nuts
Handle
Rubber damper
Engine oil

Fuel tank
Fuel system
Engine oil / Main body Oil

Main body oil

Engine oil / 

Main body oil

Oil Filter

Air cleaner element 

(Secondary)

Air cleaner element (Primary)

Every 100 to 150 

hours
Every 200 hours

Cleaning

Cleaning

Replace, after the first 50 hours

The above table shows the check frequency for standard condition. 

The check frequency may vary depending on the condition in which the machine is used.

CAUTION

12.2 Inspection And Maintenance Work Contents

Every 80 to 100 

hours

Cleaning

Oil filter

Cleaning, after the first 50 hours

Check the machine after it has cooled down. Since the muffler is very hot, you may be 

burned.

Daily inspection

Thoroughly remove dirt and oil from the 

engine and control area.

Clean or replace the air cleaner element as 

necessary.

Check and retighten all fasteners as neces-

sary.

Check the main body for oil leaks. Repair or 

replace as necessary.

50 hours service

Remove and clean the fuel filter, and inspect 

the fuel tank condition. (Fig. 10)

1.

2.

Fuel tank

Fuel filter

Fig.10

Содержание MTX-85DY





















Отзывы:

Похожие инструкции для MTX-85DY